guikuang@guikuang.com +86-18777368767
Guilin Mining Machinery Co., LTD.

4R3220 Pendulum Grinding Mill

  • /uploads/image/20180427/18/4r3220-pendulum-grinding-mill-1_1524825919.jpg
  • /uploads/image/20180427/18/4r3220-pendulum-grinding-mill-2.jpg
  • /uploads/image/20180427/18/4r3220-pendulum-grinding-mill-3.jpg
  • /uploads/image/20180427/18/4r3220-pendulum-grinding-mill-4.jpg
Similar products
  • GK1720A Pendulum Grinding Mill

    GK1720A Pendulum Grinding Mill

    GK1720A Grinding Mill is designed by our technicians based on GK1720 mill.This is a large type mill with optimized design.1.Optimized shock-absorption design for the main unit, reduce vibration when t...

    + detail
  • GK2150 Pendulum Grinding Mill

    GK2150 Pendulum Grinding Mill

    Technical & Structural Benefits of GK2150 Pendulum Grinding Mill:1.This model has high output, high efficiency and energy saving. It has small floor area and saves workshop.2.Innovative design of ...

    + detail
  • GK1500 Pendulum Grinding Mill

    GK1500 Pendulum Grinding Mill

    1.Optimized Structure & Innovative Design with 5 national patents.2.High output: With high grinding efficiency, the capacity will be increased by 20-40% than 5R4128 raymond mill. 3.Main unit: uniq...

    + detail
Contact Now +86-18777368767 PDF DOWNLOAD

4R3220 Pendulum Grinding Mill is suitable for non-flammable and non-explosive materials, with hardness less than 7, with moisture less than 6%, such as barite, limestone, ceramics, slag, gypsum, calcite, quartz, etc. The output fineness can be adjustable between 80-400 mesh.

Technical & Structural Benefits of 4R3220 Pendulum Grinding Mill:

  • Strong Grinding Force: High capacity.
  • Expanding Grinding Area: The grinding area is expanded by heightening roller and ring from160mm to 200 mm.
  • Strong ability of shoveling material:  Adopting super large shovel blade to shovel material as much as possible to be ground into the space between the roller and ring.
  • High Classifying Accuracy: Super large Classifying turbine brings a higher passing rate and stronger airflow. In addition, the labyrinth seal between the edge surface of blade turbine and powder outlet decreases the short circuit powder.
  • Dual Cyclone Collector: The collecting efficiency is up to 80% and 10% higher than single cyclone collector.
  • The rest powder is collected by the sack, so the workshop will be clean.

Model

Max Feeding Size

Product Fineness

Capacity

Gross Weight

Total Installed Power

GK2500

≤35mm

80-325mesh

15000-50000kg/h

66t

625kw

GK2150

≤35mm

80-325mesh

10000-40000kg/h

64t

548kw

GK1720A

≤35mm

80-325mesh

6000-25000kg/h

49t

424.5kw

GK1620A

≤30mm

80-325mesh

3000-18000kg/h

34.5t

329.5kw

GK1500

≤20mm

80-325mesh

2500-16000kg/h

31t

242kw

5R4128

≤20mm

80-325mesh

2000-14000kg/h

28.5t

220kw

5R4125

≤20mm

80-325mesh

2000-14000kg/h

28.5

202kw

GK1280

≤20mm

80-325mesh

1500-10000kg/h

19t

133.5kw

4R3220

≤20mm

80-325mesh

1000-7000kg/h

14.6t

101.5kw


Lubrication of 4R3220 Pendulum Grinding Mill

To ensure its normal operation and long service life, as the operating environment with much dust and bad working condition, the main gear, classifier's oil tank, elevator's worm gearbox, and the blower should be lubricated according to Drawing 9. There are probably some iron chips dropping down from the rotating parts' and gears' wear-in while using the new machine. To prevent the machine from fast worn out, it should be all right to change the lubricating oil once after one-week running. Later on, oil replacement can be made with reference to the limiting period shown in the lubrication table.When changing oil, kerosene and diesel oil should be used to wash the internal parts of the machine after discharging the aged oil.Oil should be completely eliminated after washing.And new lubricating oil can be poured again.Meanwhile please pay attention to the height of oil level.The oil level in the classifier's oil tank and elevator's worm gearbox cannot be higher than half height of the oil leveler.The oil height of blower should be between the two index lines of oil leveler.If the oil is too less, it is not enough to lubricate the machine.Too much oil results in additional power consumption,over-heat machine, and probable oil leakage.

Leave a Message Email Us

we will contact you within 24 hours.

News