Guilin Mining Machinery Co., LTD.

5R4128 Pendulum Grinding Mill

  • /uploads/image/20180427/18/5r4128-pendulum-grinding-mill-1_1524825745.jpg
  • /uploads/image/20180427/18/5r4128-pendulum-grinding-mill-2.jpg
  • /uploads/image/20180427/18/5r4128-pendulum-grinding-mill-3.jpg
  • /uploads/image/20180427/18/5r4128-pendulum-grinding-mill-4.jpg
Similar products
  • GK2500 Pendulum Grinding Mill

    Technical & Structural Benefits of GK2500 Pendulum Grinding Mill:1.This model has high output, high efficiency and energy saving. It has small floor area and saves workshop.2.Large conveying capac...

  • 4R3220 Pendulum Grinding Mill

    4R3220 Pendulum Grinding Mill is suitable for non-flammable and non-explosive materials, withhardness less than 7, with moisture less than 6%, such as, barite, limestone, ceramics, slag, gypsum, calci...

  • GK1720A Pendulum Grinding Mill

    GK1720A Grinding Mill is designed by our technicians based on GK1720 mill.This is a large type mill with optimized design.1.Optimized shock-absorption design for the main unit, reduce vibration when t...

Technical & Structural Benefits of 5R4128 Pendulum Grinding Mill

  • The Strong ability of shoveling material: Adopting super large shovel blade to shovel material as much as possible to be ground into the space between the roller and ring.
  • Expanding Grinding Space: The grinding space is expanded by heightening host base, roller, and ring.
  • High Classifying Accuracy: Super large Classifying turbine brings a higher passing ratio & stronger airflow. In addition, the labyrinth seal between the edge surface of blade turbine and powder outlet decreases the short circuit powder, which results in a high Classifying precision.
  • Dual Cyclone Collector: The collecting efficiency is up to 80% and 10% higher than single cyclone collector.
  • Large Conveying Capability: Blower adopts high-pressure centrifugal fan, which results in high air volume & pressure and improving the pneumatic conveying ability.
  • The rest powder is collected by pulse dust collector, so the workshop will be clean.
  • High capacity, power energy-saving, environmental protection, intelligent electric control for whole system---PLC (optional)

Model

Max Feeding Size

Product Fineness

(mash)

Capacity

Gross Weight

Total Installed Power

GK2500

≤35mm

80-325mesh

15000-50000kg/h

66t

625kw

GK2150

≤35mm

80-325mesh

10000-40000kg/h

64t

548kw

GK1720A

≤35mm

80-325mesh

6000-25000kg/h

49t

424.5kw

GK1620A

≤30mm

80-325mesh

3000-18000kg/h

34.5t

329.5kw

GK1500

≤20mm

80-325mesh

2500-16000kg/h

31t

242kw

5R4128

≤20mm

80-325mesh

2000-14000kg/h

28.5t

220kw

5R4125

≤20mm

80-325mesh

2000-14000kg/h

28.5

202kw

GK1280

≤20mm

80-325mesh

1500-10000kg/h

19t

133.5kw

4R3220

≤20mm

80-325mesh

1000-7000kg/h

14.6t

101.5kw


Operating Instructions for Shut-off of 5R4125 Pendulum Grinding Mill:

Stop the mill as the following steps before shut-off:
  • Stop feeding the crusher. Shut it down until the chamber is empty.
  • Stop elevator until it is empty.
  • Adjust the amplitude of electromagnetic vibration feeder to a minimum point before shut-off.
  • The main motor runs idly for about one minute after it finishes up the material and the shut it off. Exhausting material of the main frame is favorable for shortening another starting time and extends service life.
  • Shut off air blower about one minute after the mainframe stops operating and turn the level of governor valve to “off” position.
  • Turn to zero points the speed control knob of the separator and shut down separator.
  • Shut off air compressor and pulse control device.
Leave a Message Email Us

we will contact you within 24 hours.