In view of the current development trend and market demand of the domestic grinding industry, a new type of ultra-fine grinding equipment is invented for users with special needs. It is mainly suitable for calcite, Cretaceous, calcium carbonate, dolomite, kaolin, bentonite, talcum, mica, magnesite, illite, pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alunite, graphite, fluorite, phosphate rock, potassium ore, pumice, and so on. It is not inflammable and explosive nonmetallic materials that the Mohs hardness is below 9 grade and moisture is under 6%.
There are Rayon Mill, Micro Powder Mill, Vertical Grinding Mill, Large Grinding Mill, Ball Mill, Ultrafine Mill, Pendulum Grinding Mill
and also include vibration Feeder (feeder), bucket elevator, conveyor, conveyor, etc.
Summary of points for attention:
1.In the process of using the grinding mill, there should be fixed personnel to take charge of it, and the operator must have certain technical level. The necessary technical training should be taken to the operator before installation of grinding mill, so as to understand the principle and performance of the grinding mill. Let them be familiar with the operation regulations and choose the right equipment for the customers according to the actual situation. The field installation and the training of the operator should be carried on at the same time.
2.In order to make the grinding mill operating normal, we should make rules and regulations called equipment maintenance safety operation system, which will ensure the long-term safe operation of the mill. At the same time, necessary maintenance tools, grease and corresponding accessories should be equipped.
3.After a period of time, the grinding mill should be checked and the worn parts such as the roller mill ring scraper should be repaired or replaced. The connecting bolt nuts should be examined carefully before and after using the roller device to see if there is any loose phenomenon and whether the grease is enough.
4.When the grinding roller is used more than 500 hours, it should be replaced. The rolling bearings in the roller sleeve must be cleaned, and the damaged parts should be replaced in time. The tools for filling up fuel can be used by manual gas pump and grease gun.