Guilin Mining Machinery Co., LTD.

Importance of Daily Maintenance of Wet Grinding Ball Mill

Wet grinding ball mill is a necessary equipment for every concentrator. It mainly undertakes the crushing of materials to meet the granularity requirement of downward sequence process. At present, there are many kinds of wet grinding ball mills in our country, but the common disadvantage is that the energy consumption is larger. Nowadays, the society increasingly advocates energy saving and consumption reduction, and energy saving ball mills are more widely used.

Because wet grinding ball mill is a kind of grinding equipment which operates continuously every day, there will be large and small faults in the round-the-clock operation, so the daily maintenance of energy-saving ball mill is very important, which directly affects the working efficiency and service life of the ball mill.

Let's take a look at some of the important things we need to pay attention to:
1. Lubricating oil should be discharged completely after one month of use of wet grinding ball mill, and new oil should be thoroughly cleaned and replaced. In daily operation, it is necessary to check the lubricant condition and oil surface height at each lubrication point every four hours. In addition, the oil temperature of the main bearing lubricant should be controlled below 55 degrees Celsius.
2. If there is abnormal noise during the operation of the machine, stop and eliminate it in time, so as to avoid machine failure, and often check whether iron or other large hard objects are mixed into the tank.
3. Check the chains, sprockets and bearings regularly. If problems are found, they should be dealt with in time. Note that the chain tightness should be moderate. If it is too tight, the chain will break easily. If it is too loose, it may be damaged by hanging the drum or guide rail.
4. Check the wear condition of big and small gears regularly. If the wear is serious, it should be replaced in time to avoid affecting the normal work of energy-saving ball mill.
5. If the main bearing, liner bolt, grate plate, screw in and out of material, mill liner and so on are badly worn, they should be replaced in time and can not work reluctantly.

At present, Guilin Mining Machinery Co., Ltd. is a powerful manufacturer of wet grinding ball mill in China. It not only pays attention to product quality, but also has very considerate pre-sale and after-sale service. The wet ball mill produced by Guilin Mining Machinery Co., Ltd. can save about 30% energy consumption and is the first choice of grinding equipment.

GUIKUANG is a professional expert ball mill China Manufacturer. Welcome to visit our factory and we can make design for your project.
Related News